This menu item is used to configure the settings for the behavior of the CODESYS applications. This menu entry is only available for devices with CODESYS.
Figure: CODESYS Applications
Table: Applications Settings
|
Setting |
Description |
Default |
|---|---|---|
|
Exception Hardware GlobalStop |
Each hardware exception will result in a stop of all applications. |
Off |
|
Bootproject RetainMissmatch Exception |
If the check of the retain variables failed, the boot application is stopped and an exception is triggered. |
Off |
|
Bootproject RetainMissmatch Init |
If the check of the retain variables failed, the retain variables are reinitialized. |
On |
|
RetainType |
Retain Storage Location: InSRAM: External SRAM module. OnPowerfail: Saved in a File, located in the PlcLogic directory (manualy or on shutdown) |
InSRAM |
Table: TargetVisu Settings
|
Setting |
Description |
Default |
|---|---|---|
|
TargetVisu HideCursorCompletely |
Hide mouse cursor always in the targetvisu |
Off |
Table: System Settings
|
Setting |
Description |
Default |
|---|---|---|
|
Scheduler Interval Us |
CODESYS Scheduler Interval used for Software Watchdog Handling. |
1000 |
|
Channel Timeout |
CODESYS IDE communication timeout in us. |
300000 |
|
Maximum processor load of all PLC tasks |
Maximum plc load, used in plcload check task. |
95 |
|
OPCUA Enable |
Enbale/Disable OPCUA Feature |
On |
The settings can be saved with the Apply button or discarded with the Reload button.
When changing the settings, a restart of the device is necessary.