Breadcrumbs

Quick Start Guide

Please have a look at the online documentation https://wiki.kontron.ch/kchqiwi/ before you start working with your device.
This documentation includes information about your first steps to take and contains additional information like a manual, examples, FAQs and more.

This Quick Start Guide is stored under the following link: https://wiki.kontron.ch/kchqiwi/quick-start-guide

Commissioning and configuration:

The commissioning and configuration of the WebBrowser is very simple via our integrated QIWI software toolkit.
When the panel is started, the configuration menu button is briefly displayed, where the most important parameters (URL address of the web server, IP address...) can be configured or otherwise via a web browser on another device that is connected to the Panel via Ethernet.
After the configuration menu timer countdown, the Web Panel automatically starts with the configured Web page.
The configuration menu can also be called directly in the web browser with the URL "localhost" as long as the kiosk mode is not activated.

General:

The default network addresses are:

  • Ethernet 1 (eth0): 192.168.1.100, 255.255.255.0

Note

Do not rely on the designation on the hardware lid. It is possible that NET1 / NET2 do not correspond to et0 / eth1 or Ethernet1 / Ethernet2.

Use the Ethernet interface that has the default IP address 192.168.1.100 to start. This is the one were connection to the webconfig, codesysruntime, ssh,... works.


Web configuration:

  • Available at http://192.168.1.100

  • Default Username is "root", Default Password is "root" (Note lower case)

  • Here you can configure the Ethernet interfaces, URL addresses etc.

  • There is also a simple shell for Linux commands

Linux Shell:

  • The Linux Shell is accessible via SSH, e.g. with program TeraTerm

  • IP: 192.168.1.100

  • Default username is "root", password "root".


Manuals:

The manuals for the web panels are stored under the following link
https://www.kontron.de/products/systems/panel-pc/web-panel-control-panel/wp-web-panel.html

Wiki:

You can find additional information and many support, tips and examples in our Wiki.
Kontron Electronics Wiki Portal: https://wiki.kontron.ch/ 

Update device:

The device can easily be updated via micro sdcard or usb-stick.
Further information about updating the device is under following link Restore an Image on a WebPanel.
The information about the neccesary software image for the current Panel can be found at Images and Manuals.

Keep up to date:

Our Browser RSS feed keep you up to date and offer fast and effective information around QIWI Browser Updates (https://wiki.kontron.ch/kchqiwi/blog ).

Support:

If you have any further technical questions, please do not hesitate to contact our support team at the following e-mail address: support@kontron.ch

Disclaimer & Licence Information:

The software contained in the device (Image) contains parts which were licensed as free respectively open source software under the GNU General Public License, version 2 and/or 3, respectively the GNU Lesser General Public License, versions 2.1 and/or 3.0.
All used licenses are described in detail in the license info archive under following link Images and Manuals.


You can obtain a copy of the source code of the Image by contacting:

Kontron Electronics AG
Riedstrasse 1 
6343 Rotkreuz
Switzerland
Web: www.kontron-electronics.ch
E-Mail: support@kontron.ch